Skip to content

Aluminum Patio Covers in South Florida

A patio cover is a roof attached to your house, over the patio, the lanai or the pool deck. We build it in aluminum with one of three roofs (insulated solid, motorized louvered or polycarbonate) and engineer each one for its own address in Miami-Dade, Broward and Palm Beach County.
White aluminum patio cover attached along the back of a light-blue two-story house, with ceiling fans over an outdoor kitchen and dining area on a raised patio.
Underside of a white attached patio cover with ceiling fans and recessed lights, looking out over a waterfront dock lined with palms.
About Pergola Plus

Patio Cover Contractors in South Florida

Pergola Plus designs and installs aluminum patio covers attached to homes across Miami-Dade, Broward and Palm Beach County. The cover ties into the structure of the house on one side and stands on posts on the other, so the patio or the lanai becomes an outdoor room you can use in the sun and in the rain. Every cover is engineered for its address, permitted, and built by a contractor licensed and insured in Florida.
  • Licensed and insured aluminum pergola contractor serving South Florida with certified installation and code-compliant outdoor structures.
  • We design and install custom pergolas, louvered roofs, and outdoor shade systems in South Florida.
  • Premium aluminum pergolas installed by experienced South Florida contractors using high-grade materials and expert craftsmanship.
  • Custom design-build pergola systems tailored to South Florida homes, engineered for durability, performance, and architectural integration.

What Makes A Patio Cover Work

Whatever roof goes on top, these six things decide how the cover lives with the house: how it meets the wall, how it looks against it, which roof it carries, where the water goes, what you mount under it and what it takes to get it approved.

Tied Into The House

Attached to the structure of the house on one side and carried on aluminum posts on the other, so the side against the house needs no posts at all.

Finished To Match The House

Frame colors from the powder-coat palette, plain or in a wood-look texture, chosen so the cover reads as part of the house rather than something added to it.

A Roof For How You Use It

Insulated solid for the coolest shade, motorized louvered to switch between sun and cover, polycarbonate for daylight with rain protection. The roof is the one choice that changes the most.

Rain Collected At The Edge

Each of the three roofs drains into a gutter built into its frame, so the rain is collected at the edge of the cover rather than poured off onto the patio.

Fans, Lights And Outlets

Under an insulated solid roof the wiring runs inside the panels, so ceiling fans, recessed lighting and outlets mount into a finished ceiling. Ask us how it works with the other two roofs.

Engineered And Permitted

An attached cover is a permanent structure: it is engineered for its address and permitted by the city or the county before it goes up. We do the engineering and run the approval.
Dark bronze aluminum patio cover attached along a two-story house with a tile roof, shading a row of sliding doors beside a pool deck.
Configurations

One Cover, Three Roofs

Attaching it to the house is the decision this page is about; the roof is the one that follows. An insulated solid roof never moves and keeps the space coolest underneath. A motorized louvered roof opens for sun and closes for rain. A polycarbonate roof lets daylight through and keeps the patio dry. Each roof has its own page with the full specification: this one is about putting any of them on your house.
How It Works

Attached, Done Properly

Attaching a roof to a house is not the same as standing one in the yard. Four things decide whether it is still right in ten years: the connection to the house, the roof that goes on it, where the water goes, and the permit. Here is each one.

Where It Meets The House

The connection to the house is drawn by the engineering for your address, not copied from a catalogue detail. What that side of the house can carry is part of the design, which is why the first visit is a measurement, not a brochure.

Which Roof Goes On Top

Insulated solid if you want the coolest, quietest cover; motorized louvered if you want to choose between sun and shade; polycarbonate if the room behind it needs the daylight. Polycarbonate is louder in the rain than an insulated roof, and we would rather say so here.

Where The Rain Goes

Each roof drains at its edge into a gutter built into the frame; on the louvered roof the downspout runs inside the posts. Keeping that gutter clear is most of the maintenance, on any of the three.

It Is A Permitted Structure

Miami-Dade and Broward make up the Florida Building Code's High-Velocity Hurricane Zone, and Palm Beach County has its own wind requirements. Wherever you are, an attached cover is engineered for its own address and permitted before it goes up. We do the structural engineering and run the approval.
Corner of a white attached patio cover against a light-blue house, its post set at the edge of the patio and a ceiling fan above the dining area.
Design That Matches Your Style

Choose from premium colors & textures for your structure.

Frame colors come from the powder-coat palette, plain or in a wood-look texture, so the cover can match the trim of the house or stand apart from it.
white
desert sand
almond sand
adobe clay
spanish brown
bronze cedar

Modern Color Palette Options

Choose from a selection of elegant, weather-resistant colors designed to enhance your outdoor space and match your home’s architectural style.

Textured Wood-Like Finishes

Enjoy realistic wood-inspired textures that offer the warmth of natural materials with the durability and low maintenance of high-grade aluminum.
Dark bronze patio cover attached to a stucco house, with a white ceiling over a paver patio and lounge seating at the edge of the lawn.

Specifications, Including The Gaps

Everything below is either something we can stand behind today or something we have not published yet, and we say which is which. The roof itself has its own specification on its own page; this one covers what changes when it is attached to your house.

What it does

Roof options
Insulated solid, motorized louvered or polycarbonate, each with its own specification pageThe insulated solid roof, in detailThe motorized louvered roof, in detailThe polycarbonate roof, in detail
Drainage
Each roof drains into a gutter built into its frame; on the louvered roof the downspout is concealed inside the posts
Fans, lighting and outlets
With the insulated solid roof, internal channels take the wiring so fans, recessed lighting and outlets mount into the ceiling
Maintenance
Powder-coated aluminum does not rust or rot; keeping the gutter clear is most of the routine

How it is built

Mounting
Attached to the structure of the house on one side, on aluminum posts on the otherAn attached cover we built on the Intracoastal in Boca Raton
Frame material
Powder-coated extruded aluminum
Frame finish
From the powder-coat palette, plain or in a wood-look texture
Permitting
A permanent structure, so it is permitted by the city or the county: we do the structural engineering and run the approvalWhen a pergola needs a permit in South Florida
Timeline
Several weeks from permit approval to completion; the installation itself, a few days once materials are readyHow long a pergola installation takes in Florida
Investment
Set by the roof you choose. For the insulated solid roof, an estimated $95 to $130 per square foot installed from our own South Florida cost guide; our estimator gives a working range for the other twoWhat a pergola actually costs in South Florida
Where we build, and under what licence
Miami-Dade, Broward and Palm Beach County. CGC1539940, licensed and insured in Florida

Not published yet

These are the numbers a buyer should ask three contractors for. We would rather leave them blank here than print one we cannot back up.

Ask us these five

  • The connection detail to your house:ledger, beam or fascia, and how it is fixed. That comes out of the structural calculation for your address, and a generic drawing here would be worse than none.
  • Maximum projection from the house and clear span between posts.We size every cover from the structural calculation for your site, and we do not publish a catalogue span.
  • Design wind speed, design pressure and the Miami-Dade NOA number.Each structure is engineered and permitted for its own address; we are not publishing a single figure until it is the one on your drawings.What makes a pergola hurricane-resistant here
  • Warranty term, and how it splits between structure, roof and finish.Those are different warranties and we are not going to blur them into one word.
  • Financing terms.Ask us: we would rather tell you on the phone than publish a rate that changes.

What our clients say

Reviews left by our clients on Google.

5.0out of 5(28)

Rating read from the public Google profile, November 2026.

See all reviews on Google
Kelly howell

5 out of 5

Working with Pergola Plus has been an absolute delight. They did an amazing job on my beautiful pergola. I’m very happy with the project and the professional service provided.My outdoor kitchen and bar will be going underneath it.

Read this review on Google
MARIA DE LA TORRE

5 out of 5

El diseño quedó hermoso. El equipo fue super detallista. Superaron nuestras expectativas. Recomendado 100%.

Read this review on Google
raul gomez

5 out of 5

Outstanding service and beautiful work! They are very professional!

Read this review on Google

The most recent reviews from our Google Business Profile, longest first. The rating and review count above cover every review on the profile.

White attached patio cover seen from the pool deck, running along the back of a light-blue house behind a row of palms.

Patio Cover FAQs

The questions homeowners ask us most before they attach a roof to the house.

Do I need a permit for a patio cover?

Yes. An attached cover is a permanent structure, and new structures and additions need a building permit. It comes from your city or, in unincorporated areas, from the county. We do the engineering and run the approval.

Attached or freestanding?

Attached ties into the house on one side and suits a patio or lanai right off the back doors. Freestanding stands on its own posts, out by the pool or on the lawn. All three of our roofs can be built either way.

Which roof should I choose?

Insulated solid for the coolest, quietest shade; motorized louvered to open for sun and close for rain; polycarbonate to keep daylight under the cover. Each has its own page with the full specification.

Is it built for hurricanes?

It is engineered for the wind loads of its own address. Miami-Dade and Broward are the Florida Building Code's High-Velocity Hurricane Zone, with stricter requirements. We do not publish one wind figure for every cover: yours is the one on your permit drawings.

Can it attach to my fascia?

That depends on the house, and it is an engineering decision, not a sales one. Where and how the cover connects is set by the structural calculation for your address, after we have seen what that side of the house can carry.

Attached or freestanding — which should I choose?

Attached extends the house, needs no posts on the wall side and usually feels like part of the home. Freestanding goes anywhere, does not load your roof structure and is easier to permit on an older house. If your fascia or truss cannot take the load, freestanding is not a style choice, it is the answer.

Where does the water from the roof actually go?

Into an integrated gutter and down through the inside of the posts, so there is no visible downpipe. What matters is where it comes out at the bottom: discharged against the house or onto a patio it becomes a different problem, so the outlet gets tied into drainage or directed away from the slab.

Do you handle the permit, or does the homeowner?

We do. As a licensed contractor we pull the permit under our license, prepare the site plan and structural package, coordinate the engineer's sealed drawings and meet the inspector at each required inspection. You sign the owner authorization and we carry the rest.
Service Areas

Proudly Serving South Florida

We provide professional pergola construction across Miami-Dade, Broward, and Palm Beach. Our team builds custom pergolas designed for Florida’s heat, humidity, and coastal conditions—delivering durable, beautiful outdoor spaces for homes and businesses throughout the region.
Our Process

How We Build It

We build to current code so your structure is safe, and we back it with the service, the installation and the finish we would want on our own house. Permitting timelines vary by municipality, but most projects run several weeks from approval to completion, and the installation itself is usually done in a few days once the materials are ready. It is all run by the same team that handles our pergola design and construction.
On-site property visit by licensed South Florida pergola contractor to assess measurements, layout, and project requirements.

Property Visit

We visit your property, take measurements, and understand your needs so we can design your pergola precisely with care.

Custom aluminum pergola design process tailored to South Florida homes by experienced design-build contractors.

We design your structure

We create a custom design that matches your space, style, and goals, ensuring every detail reflects your outdoor vision.

Professional pergola installation in South Florida using engineered aluminum systems and code-compliant construction standards.

We build it right

Our team builds your pergola with precision, durable materials, and clean workmanship, delivering strength and quality.

Completed custom pergola project installed in South Florida, delivering durable shade and refined outdoor living performance.

You enjoy it

Once installed, your pergola is ready to enjoy. We clean your space, ensure everything works perfectly, and leave it all to us.

The Roofs In Detail

Compare The Roofs We Attach

This page is about attaching a cover to your house. The specification for each roof lives on its own page, and if you would rather close the lanai in mesh, that is a screen enclosure.
Engineered insulated roof pergolas designed for heat reduction and long-term performance in South Florida outdoor living spaces.

Modern Insulated Roof Pergolas

Our insulated roof pergolas offer maximum thermal performance, reducing heat while providing full shade and rain protection. These engineered aluminum systems create a cooler, comfortable outdoor space—perfect for year-round use and architectural beauty.
Insulated Solid Roof Pergolas
Custom louvered roof pergola systems professionally installed in South Florida, delivering adjustable shade and engineered durability for luxury properties.

Custom Motorized Louvered Pergola Systems

Take full control of your outdoor space with our custom louvered pergolas. Engineered for South Florida, the adjustable aluminum louvers regulate sun and rain at the touch of a button. A sophisticated, all-season solution for luxury outdoor living.
Motorized Louvered Pergolas
Custom polycarbonate pergola systems installed in South Florida, providing natural light and weather protection for modern patios.

Modern Polycarbonate Pergola Systems

Our polycarbonate pergolas blend durability with natural light, blocking UV rays while maintaining brightness. Engineered for weather resistance, they are perfect for elegant patios and pool decks. Get a modern design that offers protection and openness.
Polycarbonate Roof Pergolas
Professionally installed screen enclosures designed for comfort, protection, and seamless outdoor integration in South Florida.

Custom Screen Enclosures for Outdoor Living

Protect your outdoor space from insects and debris with our custom, fully permitted screen enclosures. Designed for South Florida, they preserve airflow and visibility, ensuring comfortable evenings while matching your home’s architectural integrity.
Pool And Patio Screen Enclosures